Stairville CLB4 User Manual
  1. Manuals
  2. Brands
  3. Stairville Manuals
  4. Lighting Equipment
  5. CLB4
  6. User manual

Stairville CLB4 User Manual

Compact led-bar 4 tripar led lighting set
Hide thumbs Also See for CLB4:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Compact LED-Bar
4 TriPAR CLB4
LED lighting set
user manual

Advertisement

Table of Contents
loading

Related Manuals for Stairville CLB4

Summary of Contents for Stairville CLB4

  • Page 1 Compact LED-Bar 4 TriPAR CLB4 LED lighting set user manual...
  • Page 2 Musikhaus Thomann e.K. Treppendorf 30 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 08.02.2013...

  • Page 3: Table Of Contents

    7.2 Device functions..........................24 7.3 Foot switch............................25 7.4 Main menu............................26 7.5 Menu overview..........................33 7.6 Functions in 2-channel DMX mode................... 35 7.7 Functions in 3-channel DMX mode................... 36 7.8 Functions in 4-channel DMX mode................... 37 Compact LED-Bar 4 TriPAR CLB4...
  • Page 4 Table of contents 7.9 Functions in 7-channel DMX mode................... 37 7.10 Functions in 8-channel DMX mode..................40 7.11 Functions in 14-channel DMX mode (mode 4)..............41 Technical specifications........................43 Troubleshooting............................44 Cleaning............................... 46 Protecting the environment......................47 LED lighting set...

  • Page 5: General Notes

    If you sell the device to other users, be sure that they also receive this manual. Our products are subject to a process of continuous development. We therefore reserve the right to make changes without notice. Compact LED-Bar 4 TriPAR CLB4...
  • Page 6 General notes Symbols and signal words This section provides an overview of the symbols and signal words used in this user manual. Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided.
  • Page 7 General notes Warning signs Type of danger Warning – danger zone. Compact LED-Bar 4 TriPAR CLB4...

  • Page 8: Safety Instructions

    Safety instructions Safety instructions Intended use This device is intended to be used as an electronic illumination effect using LED technics. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
  • Page 9 Always use proper ready-made insulated mains cabling (power cord) with a pro‐ tective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a regis‐ tered electrician. Compact LED-Bar 4 TriPAR CLB4...
  • Page 10 Safety instructions WARNING! Eye damage caused by high light intensity Never look directly into the light source. WARNING! Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. NOTICE! Risk of fire Do not cover the device nor any ventilation slots.
  • Page 11 Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire. Compact LED-Bar 4 TriPAR CLB4...

  • Page 12: Features

    Features Features The LED lighting set is particularly suitable for lighting applications in clubs or discos, on rock stages as well as in theatres and musicals. Special features of this device: 4 LED spots with 7 TRI-Colour LEDs each Control via DMX (6 different modes) 16 preprogrammed automatic shows Sound control Master / slave mode...

  • Page 13: Installation

    NOTICE! Risk of overheating Always ensure sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). Compact LED-Bar 4 TriPAR CLB4...
  • Page 14 Installation NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand. NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐...
  • Page 15 The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please refer to the drawing and table below for pin the assignment of a suitable XLR plug. Configuration Ground, shielding Signal inverted (DMX–, ‘cold signal’) Signal (DMX+, ‘hot signal’) Compact LED-Bar 4 TriPAR CLB4...
  • Page 16 Installation Pre-mounted spots The four sports (1 … 4, right to left) are pre-mounted on the T-bar. Locking screw for fixing the inclination angle. Locking screw for fixing the spots on the T-bar and the horizontal orientation (dispersion direction). Electrical connection of the spot at the T-bar (pre-mounted). LED lighting set...
  • Page 17 Installation 1/4" phone socket to connect a foot controller. Flange 36 mm to attach the T-bar on a tripod. Compact LED-Bar 4 TriPAR CLB4...

  • Page 18: Starting Up

    Starting up Starting up Establish all connections as long as the unit is switched off. Use the shortest possible high- quality cables for all connections. LED lighting set...
  • Page 19 Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W). Compact LED-Bar 4 TriPAR CLB4...
  • Page 20 Starting up DMX indicator When the display is flashing in ‘DMX’ mode, no DMX signal is received. Perhaps the DMX con‐ troller is off or the wiring is incorrect. If the display lights up solid, the device is receiving a valid DMX signal.

  • Page 21: Connections And Operating Elements

    Connections and operating elements Connections and operating elements Compact LED-Bar 4 TriPAR CLB4...
  • Page 22 Connections and operating elements 1 Power In IEC chassis connector for operating voltage supply with fuse holder. 2 DMX In DMX input. 3 DMX Out DMX output. 4 Footswitch Input 1/4" phone socket for foot controller connection. 5 Display. 6 [Mode] button Activates the main menu and toggles between menu items.
  • Page 23 Connections and operating elements 8 [Up] button Increases the displayed value by one. 9 [Down] button Decreases the displayed value by one 10 Power Out IEC chassis socket for the power supply cable to the next unit. Compact LED-Bar 4 TriPAR CLB4...

  • Page 24: Operation

    Operation Operation 7.1 Starting up the device Connect the unit to the power grid to start operation. 7.2 Device functions All functions are controlled via buttons and display on the unit. LED lighting set...

  • Page 25: Foot Switch

    Press the button once to pause a running programme. Press the button again to let the programme continue. Blackout Press the button once to turn off a running programme. Press the button again to return to the previous mode. Compact LED-Bar 4 TriPAR CLB4...

  • Page 26: Main Menu

    Operation 7.4 Main menu Press [Mode] to activate the main menu and select an operating mode. Use [Setup] to select further options. Use [Up] and [Down] to change the respectively shown value. When the dis‐ play shows the desired value, press [Mode]. If you don't press any button for about 30 seconds, the display turns off.
  • Page 27 ‘SP01’ (slow) and ‘SPFL’ (fast) with [Up] and [Down]. Press [Setup] again to adjust the flash frequency. The display shows ‘FS00’ . Now you can select a value between ‘FS00’ (slow) and ‘FS99’ (fast) with [Up] and [Down]. Compact LED-Bar 4 TriPAR CLB4...
  • Page 28 Operation Operating mode ‘Automatic’ Automatic operation can only be activated if the unit is working in stand-alone mode or as master device in a master / slave combination. This setting is only relevant if the unit is not controlled via DMX. Press [Mode] repeatedly until the display shows ‘AUTO’...
  • Page 29 Make sure that this number matches the configuration of your DMX controller. The following table shows the highest possible DMX address for the different DMX modes. Mode Highest possible DMX address 3-channel 4-channel 8-channel 14-channel 2-channel 7-channel Compact LED-Bar 4 TriPAR CLB4...
  • Page 30 Operation Press [Setup], then you can select one of the following DMX operating modes with [Up] and [Down]: ‘3-ch’ (three channels) ‘4-ch’ (four channels) ‘8-ch’ (eight channels) ‘14ch’ (fourteen channels) ‘2-ch’ (two channels) ‘7-ch’ (seven channels) Operating mode ‘Slave’ This setting is only relevant if the unit is operated as slave device in a master / slave configura‐ tion and is not controlled via DMX.
  • Page 31 Press [Setup] and use [Up] and [Down] to select a sound-control mode ‘SO.01’ … ‘SO.16’ . Press [Setup] again and adjust the sound-control sensitivity with [Up] and [Down] in a range from ‘SV.00’ to ‘SV.31’ . Compact LED-Bar 4 TriPAR CLB4...
  • Page 32 Operation Constant unicoloured pattern A constant unicoloured pattern can only be activated if the unit is working in stand-alone mode or as master device in a master / slave combination. This setting is only relevant if the unit is not controlled via DMX. Press [Mode] repeatedly until the display shows ‘Colr’...

  • Page 33: Menu Overview

    Operation 7.5 Menu overview Compact LED-Bar 4 TriPAR CLB4...
  • Page 34 Operation LED lighting set...

  • Page 35: Functions In 2-Channel Dmx Mode

    Constant unicoloured pattern in purple for all LEDs 70…79 Constant unicoloured pattern in white for all LEDs 80…89 Preprogrammed automatic show no. 1, speed setting via channel 2 230…239 Preprogrammed automatic show no. 16, speed setting via channel 2 Compact LED-Bar 4 TriPAR CLB4...

  • Page 36: Functions In 3-Channel Dmx Mode

    Operation Channel Value Function 240…255 Sound-controlled show 0…255 Increasing speed Channel 1 = 240…225 0…255 Sound mode 1…16 7.7 Functions in 3-channel DMX mode Channel Value Function 0…255 Intensity red (0 % to 100 %) for all LEDs 0…255 Intensity green (0 % to 100 %) for all LEDs 0…255 Intensity blue (0 % to 100 %) for all LEDs LED lighting set...

  • Page 37: Functions In 4-Channel Dmx Mode

    Dimmer (0 % to 100 %) 7.9 Functions in 7-channel DMX mode Channel Value Function 0…255 Intensity red (0 % to 100 %) for all LEDs 0…255 Intensity green (0 % to 100 %) for all LEDs Compact LED-Bar 4 TriPAR CLB4...
  • Page 38 Operation Channel Value Function 0…255 Intensity blue (0 % to 100 %) for all LEDs 0…9 Manual mode, colours are adjustable via channels 1 to 3 10…19 Constant unicoloured pattern in red for all LEDs 20…29 Constant unicoloured pattern in yellow for all LEDs 30…39 Constant unicoloured pattern in green for all LEDs 40…49...
  • Page 39 Operation Channel Value Function 0…255 Increasing speed Channel 4 = 240…255 0…255 Sound mode 1…16 Channel 4 = 0…239 0…255 Strobe effect, increasing speed Channel 4 = 0…239 0…255 Dimmer (0 % to 100 %) Compact LED-Bar 4 TriPAR CLB4...

  • Page 40: Functions In 8-Channel Dmx Mode

    Operation 7.10 Functions in 8-channel DMX mode Channel Value Function 0…255 Intensity red (0 % to 100 %) for all LEDs of spots 1 and 2 0…255 Intensity green (0 % to 100 %) for all LEDs of spots 1 and 2 0…255 Intensity blue (0 % to 100 %) for all LEDs of spots 1 and 2 0…255...

  • Page 41: Functions In 14-Channel Dmx Mode (Mode 4)

    Intensity blue (0 % to 100 %) for all LEDs of spot 3 0…255 Intensity red (0 % to 100 %) for all LEDs of spot 4 0…255 Intensity green (0 % to 100 %) for all LEDs of spot 4 Compact LED-Bar 4 TriPAR CLB4...
  • Page 42 Operation Channel Value Function 0…255 Intensity blue (0 % to 100 %) for all LEDs of spot 4 0…255 Strobe effect, increasing speed 0…255 Dimmer (0 % to 100 %) LED lighting set...

  • Page 43: Technical Specifications

    , 50 … 60 Hz Power consumption 80 W/240 V, 82 W/110 V Fuse 1.0 A/240 V, 2.0 A/110 V Dimensions (W × D × H) 682 mm × 270 mm × 60 mm Weight 5.4 kg Compact LED-Bar 4 TriPAR CLB4...

  • Page 44: Troubleshooting

    Troubleshooting Troubleshooting NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX output to audio devices such as mixers or amplifiers. In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting: LED lighting set...
  • Page 45 DMX interface circuits. If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de. Compact LED-Bar 4 TriPAR CLB4...

  • Page 46: Cleaning

    Cleaning Cleaning Optical lenses Clean the exterior of accessible optical lenses periodically to optimise light output. The fre‐ quency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. Clean with a soft cloth using normal glass cleaning products.

  • Page 47: Protecting The Environment

    Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. Compact LED-Bar 4 TriPAR CLB4...
  • Page 48 Notes LED lighting set...
  • Page 49 Notes Compact LED-Bar 4 TriPAR CLB4...
  • Page 50 Notes LED lighting set...
  • Page 52 Musikhaus Thomann e.K. · Treppendorf 30 · 96138 Burgebrach · Germany · www.thomann.de...

Table of Contents