Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Stairville BossFX-1
Summary of Contents for Stairville BossFX-1
- Page 1 LED BossFx-1 Bundle LED lighting set user manual...
- Page 2 Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 13.12.2017, ID: 424577...
-
Page 3: Table Of Contents
7.5 Functions in 5-channel DMX mode................ 24 7.6 Functions in 10-channel DMX mode..............24 7.7 Functions in 28-channel DMX mode..............25 Technical specifications....................29 Plug and connection assignment................. 30 Troubleshooting........................31 Cleaning............................ 32 Protecting the environment................... 33 LED BossFx-1 Bundle... -
Page 4: General Information
General information General information This manual contains important instructions for the safe operation of the unit. Read and follow the safety instructions and all other instructions. Keep the manual for future reference. Make sure that it is available to all those using the device. If you sell the unit please make sure that the buyer also receives this manual. -
Page 5: Symbols And Signal Words
Warning signs Type of danger Warning – high-voltage. Warning – hot surface. Warning – laser radiation. Warning – suspended load. LED BossFx-1 Bundle... - Page 6 General information Warning signs Type of danger Warning – danger zone. LED lighting set...
-
Page 7: Safety Instructions
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. LED BossFx-1 Bundle... - Page 8 Safety instructions DANGER! Electric shock caused by short-circuit Always use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician.
- Page 9 Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire. LED BossFx-1 Bundle...
-
Page 10: Features
Features Features Special features of the device: 2 LED spots each with 6 tricolour LEDs, 9 W each Derby effect with each 6 tricolour LEDs, 3 W each Stroboscope with 4 LEDs, 2 W each (white and ultra-violet) Grading laser with two laser diodes (green and red) Control via DMX (4 different modes), buttons and display on the unit, the sup- plied wireless foot switch and the supplied infrared remote control Preprogrammed automatic shows... -
Page 11: Installation
Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain. LED BossFx-1 Bundle... - Page 12 Installation NOTICE! Risk of overheating The distance between the light output and the illuminated surface must be more than 2.0 m (78.7 in). Always ensure sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.
- Page 13 Slide the battery holder back into the remote until it clicks into place. When shipping, the battery is already installed in the remote and protected against discharge by a transparent plastic foil. Remove the plastic foil prior to first use. LED BossFx-1 Bundle...
-
Page 14: Starting Up
Starting up Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. -
Page 15: Connections And Controls
6 IEC chassis plug for power supply with fuse holder. 7 [DMX IN] / [DMX OUT] DMX in and output. 8 Antenna for the signals of the wireless foot switch. 9 [MICROPHONE SENSITIVITY] Controller for the sensitivity of the built-in microphone. LED BossFx-1 Bundle... - Page 16 Connections and controls 10 Display. [MENU] Activates the main menu and toggles between menu items. Closes an opened submenu. [ENTER] Selects an option of the respective operating mode, confirms the set value. [UP] Increases the displayed value by one. [DOWN] Decreases the displayed value by one.
- Page 17 [B] Selection of an automatic show for the laser (AL01 … AL06) [C] Selection of an automatic show for the strobe LEDs (AF01 … AF12) [0] … [9] Selecting programme speed (0 = slow, 9 = fast) [-/--] No function. Button to switch between auto and sound-controlled mode. LED BossFx-1 Bundle...
-
Page 18: Operating
Operating Operating 7.1 Starting and stopping operation Starting Complete the following steps to start operation: Verify that all required laser safety precautions have been taken. Make sure that there is no one in the reach of the laser beam. Insert the safety key into the lock. If not already done, connect the device to the mains. - Page 19 ‘dXXX’ Setting the DMX address 3-channel: ( ‘001’ … ‘510’ ) 5-channel: ( ‘001’ … ‘508’ ) 10-channel: ( ‘001’ … ‘503’ ) 28-channel: ( ‘001’ … ‘485’ ) ‘SLA’ Operating mode ‘Slave’ ‘SLAV’ Slave mode selection LED BossFx-1 Bundle...
-
Page 20: Menu Overview
Operating Main menu Menu level 2 Menu level 3 Meaning ‘SYS’ System settings ‘LEdS’ Enabling automatic shutdown of the display when not in use ( ‘on’ ) or disabling ( ‘off’ ) ‘teSt’ Starting self-test ‘rESt’ Reset to factory defaults ‘W-EN’... - Page 21 170…255 AP18 Automatic show for the laser, if channel 1 = 32…65 0…39 AL01 40…79 AL02 80…119 AL03 120…139 AL04 140…159 AL05 160…255 AL06 Automatic show for the strobe LEDs, if channel 1 = 66…95 0…14 AF01 LED BossFx-1 Bundle...
- Page 22 Operating Channel Value Function 15…29 AF02 30…44 AF03 45…59 AF04 60…74 AF05 75…89 AF06 90…104 AF07 105…119 AF08 120…134 AF09 135…149 AF10 150…164 AF11 165…255 AF12 Automatic show for all components, if channel 1 = 96…127 0…19 AM01 20…39 AM02 40…255 AM03 Sound-controlled automatic show for the LED spots and derby effects, if channel 1 = 128…159...
- Page 23 90…104 SF07 105…119 SF08 120…134 SF09 135…149 SF10 150…255 SF11 Sound-controlled automatic show for all components, if channel 1 = 224…255 0…19 SM01 20…39 SM02 40…255 SM03 Running speed, if channel 1 = 10…127 0…255 Increasing speed LED BossFx-1 Bundle...
-
Page 24: Functions In 5-Channel Dmx Mode
Operating 7.5 Functions in 5-channel DMX mode Channel Value Function LED spots and derby effects 0…255 Intensity red (0 % to 100 %) 0…255 Intensity green (0 % to 100 %) 0…255 Intensity blue (0 % to 100 %) 0…191 Dimmer (0 % to 100 %), colour selection with channel 1…3 192…200 Sound-controlled strobe effect (white) -
Page 25: Functions In 28-Channel Dmx Mode
7.7 Functions in 28-channel DMX mode Channel Value Function Derby effect 1 0…255 Intensity red (0 % to 100 %) 0…255 Intensity green (0 % to 100 %) 0…255 Intensity blue (0 % to 100 %) 0…9 Without function LED BossFx-1 Bundle... - Page 26 Operating Channel Value Function 10…255 Strobe effect with increasing speed Motor control 0…4 Stopped 5…127 Clockwise rotation, speed increasing 128…133 Stopped 134…255 Counter-clockwise rotation, speed increasing LED spot 1 0…255 Intensity red (0 % to 100 %) 0…255 Intensity green (0 % to 100 %) 0…255 Intensity blue (0 % to 100 %) 0…9...
- Page 27 LED on 10…255 Strobe effect with increasing speed LED 3, white 0…4 Blackout 5…9 LED on 10…255 Strobe effect with increasing speed LED 4, white 0…4 Blackout 5…9 LED on 10…255 Strobe effect with increasing speed 0…4 Blackout LED BossFx-1 Bundle...
- Page 28 Operating Channel Value Function 5…9 LEDs on 10…255 Strobe effect with increasing speed LED lighting set...
-
Page 29: Technical Specifications
IP20 Power consumption 130 W Fuse 5 mm × 20 mm, 3.15 A, 250 V, slow-blow Battery (wireless foot switch) V23GA, 12 V T-bar width 1500 mm Height (T-bar plus tripod) max. 2500 mm Weight 8.8 kg LED BossFx-1 Bundle... -
Page 30: Plug And Connection Assignment
Plug and connection assignment Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equipment so that a perfect light experience is guaranteed. Please take our tips, because especially in ‘Sound & Light’ caution is indicated: Even if a plug fits into a socket, the result of an incorrect connection may be a destroyed DMX controller, a short circuit or ‘just’... -
Page 31: Troubleshooting
No response to the wireless foot switch 1. Check the battery of the wireless foot switch. 2. Check in the ‘SYS’ menu whether the interface for the wireless foot switch is active. 3. Change the orientation of the antenna. LED BossFx-1 Bundle... -
Page 32: Cleaning
Cleaning Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating envi- ronment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. -
Page 33: Protecting The Environment
Dispose this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. LED BossFx-1 Bundle... - Page 34 Notes LED lighting set...
- Page 36 Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de...
Need help?
Do you have a question about the BossFX-1 and is the answer not in the manual?
Questions and answers
I can't get the laser to work. I have turned it on with the key, but when I choose an auto laser program, nothing happens. product LED BossFx-I pro
Ensure the following steps are completed if the Stairville BossFX-1 laser does not work after turning it on and selecting an auto laser program:
1. Verify that all required laser safety precautions are taken.
2. Ensure the safety key is inserted and turned to the 'ON' position.
3. Check that the device is properly connected to the mains.
4. Make sure the foot switch is turned on.
5. Confirm that the required interlock switch (e.g., emergency stop switch) is properly connected, as the laser will not function without it.
6. If the issue persists, check the main menu settings and confirm the correct operation mode is selected.
If the laser still does not work, inspect the interlock plug to ensure it is correctly configured as per safety requirements.
This answer is automatically generated