Table of Contents
Advertisement
Mounting options
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not
use ordinary microphone cables.
Never connect the DMX input or output to audio devices such as mixers
or amplifiers.
You can install the unit in hanging or standing position. When in use, the device must
always be attached to a solid surface or an approved truss.
Always work from a stable platform whenever installing, moving or servicing the
unit. In doing so, the area underneath the unit must be cordoned off.
The Quick Lock openings (A) on the bottom side of the housing allow the secure
attachment of Omega brackets. There, you can fasten adapters such as half couplers,
trigger clamps, c-hooks etc. The safety cable must be threaded through the cut-outs
(B) on the bottom of the housing.
A
B
A
Please note that this device must not be connected to a dimmer.
A
A
Installation
Infinite Pixel 250
11
Moving Head
Advertisement
Table of Contents
