Operating; Main Menu - Stairville FS-350 Series User Manual

Operating

7 Operating

7.1 Main menu

Starting the device
Navigating the menu
DMX address
Slave function
Operating hours display
FS-x350 LED Follow Spot, FS-x150 LED Follow Spot
14
Follow Spot
Connect the device to the power grid. The display indicates a system reset. The
device is then ready for use.
The device is controlled using the buttons and faders.
1. Press [MENU] to activate the main menu.
2. Press [UP] or [DOWN] to select a submenu or value.
3. When the display shows the desired submenu or value, press [ENTER].
ð The submenu opens or the new value is confirmed.
4.
Press [MENU] to return to the parent menu level.
This setting is only relevant if the device is controlled via a DMX controller.
1. Press [MENU] to activate the main menu.
2. Press [UP] or [DOWN] until the display shows 'DMX-Address' and confirm the
selection with [ENTER].
3.
Press [UP] or [DOWN] to select a value between '1' and '512' for the desired
DMX address and confirm the selection with [ENTER].
Make sure that this number matches the configuration of your DMX controller.
Since the device uses 6 DMX channels, the highest usable DMX start address is
507.
This setting is only relevant if the device is not controlled via DMX.
1.
Press [MENU] to activate the main menu.
2.
Press [UP] or [DOWN] until the display shows 'Slave' and confirm the selection
with [ENTER].
3.
Press [UP] or [DOWN] until the display shows 'Yes' and confirm the selection
with [ENTER].
ð The device is in Slave mode. With correct cabling, it behaves exactly like
the controlling master device.
4.
Press [UP] or [DOWN] until the display shows 'No' and confirm the selection
with [ENTER].
ð The device is not in Slave mode.
1. Press [MENU].
2. Press [UP] or [DOWN] until the display shows 'Fixture Hours' and confirm the
selection with [ENTER].
3.
Press [UP] or [DOWN] until the display shows the desired submenu and confirm
the selection with [ENTER].