Table of Contents
Advertisement
Operating
7.4 System information
Infinite Pixel 250
20
Moving Head
Menu level 2
Menu level 3
'Back Light'
'Calibrations'
'Reset'
'Factory'
'Fan Mode'
'P/T Feedback'
Use the 'Information' menu to call up information about the system.
1.
Press
to activate the main menu.
2.
Press
or
until the display shows 'Information' and confirm your selection
with .
3.
Press
or
to select the desired sub menu or the desired value and confirm
the selection with .
The following sub menus are available:
Menu level 2
'Version'
'Temperature'
'UID'
'LED Time'
'Power Time'
Function
'Always On'
The display illumination is perma‐
nently on.
'60s Off'
The display illumination is switched
off after 60 seconds.
'Pan'
Calibrate the starting position for the
rotation.
'Tilt'
Calibrate the starting position for the
inclination.
'No'
No action
'Yes'
All movable axes are reset to their
homepositions.
The device is reset to factory defaults.
'Smart'
Temperature-controlled fan
'Max'
Maximum cooling power
'No'
Auto-correction of pan and tilt deac‐
tivated (not recommended).
'Yes'
Auto correction on pan and tilt acti‐
vated. The device returns to its
starting position if the moving head
is unintentionally adjusted.
Function
Displays the current software version.
Displays the current temperature of the device
base.
Displays the UID codes of the LEDs.
Displays the total running time of the LEDs.
Displays the total running time of the device.
Advertisement
Table of Contents
