Levelling The Washing Machine; Connect The Water Supply Hose; Drain Hose - Heinner HWM-M6010SMD++ Manual

7

Levelling the washing machine

• The lock nuts on all four feet must be screwed tightly against the housing
1. Loosen the lock nut.
2. Turn your foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a spanner. Make sure the machine is level and steady.

Connect the water supply hose!

To prevent leakage or water damage, follow the instructions.
• Do not kink, crush or modify water inlet hose.
• Connect manually, do not use tools. Check if the connections are tight.

Drain Hose

• Position drain hose properly, otherwise damage might result of water leakage.
•Do not kink or protract the drain hose
There are two ways to place the end of drain hose:
Acoustic Sponge / Panel.
• Please make sure to assemble the acoustic sponges/panel, which can effectively reduce the noise caused
by the machine while working, in order to provide you with a more peaceful and quiet living environment.
1. Get the machine laid on the floor, using some soft material like foam or clothes between the machine
and floor for protection.
www.heinner.com