Operation And Maintenance - Heinner HWM-M6010SMD++ Manual

Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
3
•The water inlet and outlet hoses have to be safely installed and remain undamaged. Otherwise, water
leakage can occur.
•Do not remove the drain pump filter while there is still water in the appliance. Big quantities of water can
leak out, and there is a risk of scalding due to hot water.

OPERATION AND MAINTENANCE

•Never use any flammable, explosive or toxic solvents. Do not use gasoline and alcohol etc. as detergents.
Only select detergents that are suitable for machine washing.
•Make sure that all pockets are emptied. Sharp and rigid items such as coins, brooches, nails, screws,
stones etc. may cause serious damage to this machine.
•Remove all objects from pockets such as lighters and matches before using the appliance.
•Thoroughly rinse items that have been washed by hand.
•Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot
removers, turpentine, wax and wax removers should be washed in heat with an extra amount of detergent
before being dried in the appliance.
•Items containing foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and
clothes or pillows fitted with foam rubber pads should not be dried in the machine
•Fabric softeners or similar products should be used as recommended in their instructions.
•Never try to open the door forcefully. The door will unlock shortly after the end of a cycle.
•Please do not close the door with excessive force. If it is found difficult to close the door, please check if
the clothes are properly inserted and distributed.
•Always unplug the appliance and close the water tap before cleaning and maintenance and after each use.
•Never pour water over the appliance for cleaning purposes. Risk of electric shock!
•Repairs shall only be carried out by the manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard. The producer will not be responsible for damage caused by the intervention of
non-authorized persons.
TRANSPORT
•Before Transport:
-Bolts shall be reinstalled to the machine by a specialized person
–Accumulated water shall be drained out of the machine.
•This appliance is heavy.
•Transport with care.
•Never hold any protruding part of the machine when lifting.
•The machine door cannot be used as a handle.
www.heinner.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HWM-M6010SMD++ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Hwm-m7012smd++

Table of Contents