6.4
HC Advanced TT (15A/18A/25A)
ES
La versión para modelos HC 15A a 25A consta de una
sola tarjeta electrónica con:
• Dos relés configurables (para anomalías eléctricas e
hidráulicas, bomba de funcionamiento, booster)
• Entrada ON/OFF para encender o apagar la bomba
mediante un comando externo (ej, interruptor de flotador
de funcionamiento en seco u otro contacto limpio). El
cierre del contacto permite activar el inversor
• entrada sensor tèrmico motor
• control areas de riego (con dispositivo MULTIPRESS u
otro dispositivo compatible)
• Conexión
con
otros
Multibombas)
Istruzioni-HCMMMTTT-09022023 (Cod.620100007 Rev.16) EsEng (USA) MAC3.doc
hidrocontroladores
(modo
J13
J12
J9
J7
J8
J6
J14
J5
EN
The version for HC 15A to 25A models consist of a single
electronic board with:
•
Two configurable relay (for electrical and hydraulic
anomalies, running pump, booster)
•
ON / OFF input to switch the pump on or off using an
external command (eg dry running floatswitch or other
clean contact). Closing the contact allows the inverter to
be activated
•
Input for motor thermal
•
Irrigation zones control (by device MULTIPRESS or other
compatible device)
•
Connection with other Hydrocontrollers
mode)
R1
R2
(multipump
32