Main Menu - Swegon ESENSA Series Manual

2.1.2 Main menu

The main menu consists of a rotary menu with 7 icons.
Control
The control menu will allow for the user to change basic pa-
rameters and operation status of the unit.
The unit can be started or stopped
The fan speed can be selected; three manual speeds + one
auto speed
Post heating, post cooling and free cooling setpoints can be
changed.
Heat/Cool activation if corresponding option present.
Alarm
Alarms are displayed on the main screen of the HMI. Active
alarms can be viewed in this menu. All the alarms can be
reset.
A fault can be traced by examining the function or functional
component indicated in the alarm text. More information
about the individual alarms (in the corresponding operation &
maintenance manual).
If the fault cannot be immediately remedied:
Consider whether the air handling unit can continue to oper-
ate until the fault has been remedied.
Time schedule
The built-in timer enables you to control the AHU's operat-
ing mode/time. Certain other oversteering functions such as
external timer, communication, etc. affect the preset operat-
ing modes. The controller allows 6 time slots (channels) to be
configured.
Time and date
The current date and time must be set and adjusted af-
ter the commissioning and later on if needed. The timer
automatically takes leap years into consideration. .
Time schedule
Times and days can be set when the air handling unit is
to run in the high speed mode, medium speed mode, low
speed mode or be switched off. For each day (Monday -
Sunday), six different time slots can be configured. The
time slots are subsequent.
Seasonal management
The seasonal management menu allows for the deacti-
vation of heating coils, cooling coils and bypass freecool-
ing function based upon a year calendar. In between the
programmed interval, the selected function is OFF.
8 www.swegon.com
GB.ESENSA.MC.2300818
We reserve the right to alter specifications.
Readings
The operating status and the Settings can be read.
Used for performance checks and for generally checking
Settings, power consumption, etc. No Settings can be
altered in this menu group.
Maintenance
Configuration of service related settings. A maintenance
warning interval can be configured as well as the filter
clogging alarm.
Settings/Basic Setup
The basic setup menu will guide the user through the
most critical settings of the air handling unit. This setup
procedure is described in detail, section 1.1.3
Settings/Advanced setup
A code and a special training are desired for access to this
menu (see its description in Advanced setup section here
below).
Settings/Product setup
A code and a special training are desired for access to this
menu. In Addition, it has to be previously enable in advanced
settings thanks to parameter "Enable Setup" (see its de-
scription in Advanced setup section here below)
We reserve the right to alter specifications.
GB.ESENSA.MC.230818
BASIC SETUP
language
units
airflow regulation
Temperature
fire alarm
www.swegon.com 9