Horizon Hobby PROBOAT JETSTREAM PRB08051 Owner's Manual page 11

Replacing the Armor Plating
1. Using a 1.5mm hex driver remove the ten 1.5mm hex screws
from the intake grate (PRB281145).
2. Using a 1.5mm hex driver remove the twenty-two 1.5mm hex
screws from the armor plating (PRB281138).
3. Using a 1.5mm hex driver remove the six 1.5mm hex screws
from the rail armor (PRB281138).
4. Replace the damaged parts, and reassemble
in reverse order.
EN
11