Summary of Contents for Horizon Hobby PROBOAT PCF Mark I 24 Swift Boat RTR
Page 1
Scan the QR code and select the Manuals and Support quick links from the product page for the most up-to-date manual information. Scannen Sie den QR-Code und wählen Sie auf der Produktseite die Quicklinks Handbücher und Unterstützung, um die aktuellsten Informationen zu Handbücher. Scannez le code QR et sélectionnez les liens rapides Manuals and Support sur la page du produit pour obtenir les informations les plus récentes sur le manuel.
Page 2
NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit www.horizonhobby.com or www.towerhobbies.com and click on the support or resources tab for this product. MEANING OF SPECIAL LANGUAGE...
Page 3
• Always charge in a well-ventilated area. • Never attempt to charge dead, damaged or wet battery packs. • Always terminate all processes and contact Horizon Hobby if the • Never attempt to charge a battery pack containing different types of product malfunctions.
Install the Transmitter Batteries This transmitter requires 4 AA batteries (included). 1. Remove the battery cover from the transmitter. 2. Install the batteries as shown. 3. Install the battery cover. CAUTION: NEVER remove the transmitter batteries while the model is powered on. Loss of model control, damage, or injury may occur.
Stand Assembly 1. Apply the included self-adhesive padding material to the top of the laser-cut ply stand end pieces. 2. Insert the tabs of the ply side piece into the slots of the end pieces as shown. TIP: The ply stand may be assembled using CA adhesive to secure the pieces permanently or without adhesive, allowing easy disassembly and storage of the stand.
Range Check IMPORTANT: Perform a range check at the beginning of each 2. Have an assistant remain with the boat to check for proper boating session, after repair or after installation of a new battery. control movement of the steering mechanism in response to your transmitter input.
When You Are Finished NOTICE: When you are finished boating, never leave the boat in 5. Fully dry the inside and outside of the boat. Carefully dry all direct sunlight or in a hot, enclosed area such as a car. Doing so battery, motor and receiver connectors by removing one at a time can damage the boat.
Installing the Optional Gun Turret Servo The top twin gun turret can be converted to allow rotation to be controlled by a transmitter. Additional components required (not included): • SX108 Micro Gear Servo (SPMSSX108) • SR515 DSMR 5-Channel Sport Receiver (SPMSR515) •...
Product, (iv) attempted service by anyone liability is asserted. As Horizon has no control over use, setup, final other than a Horizon Hobby authorized service center, (v) Product assembly, modification or misuse, no liability shall be assumed nor not purchased from an authorized Horizon dealer, or (vi) Product not accepted for any resulting damage or injury.
United States of America Champaign, Illinois, 61822 (Product Technical Assistance) 877-504-0233 websales@horizonhobby.com Sales 800-338-4639 Hanskampring 9 Horizon Technischer Service service@horizonhobby.de D 22885 Barsbüttel, Sales: Horizon Hobby GmbH +49 (0) 4121 2655 100 Germany PCF Mark I 24” Swift Boat RTR...
EU Manufacturer of Record: Pro Boat PCF Mark I 24, RTR (PRB08046) Horizon Hobby, LLC Hereby, Horizon Hobby, LLC declares that the device is 2904 Research Road in compliance with the following: Radio Equipment Directive (RED) Champaign, IL 61822 USA...
Need help?
Do you have a question about the PROBOAT PCF Mark I 24 Swift Boat RTR and is the answer not in the manual?
Questions and answers