Technical Specifications; Electrical Requirements; Technical Information; Product Dimensions - Dimplex Opti-V VISTA VST130-I Installation And User Manual

Technical Specifications

Electrical Requirements

WARNING: Construction and wiring must comply with local building codes and other applicable regulations to
reduce the risk of re, electric shock and injury to persons.
WARNING: To reduce the risk of re, electric shock or injury to persons, always use a licensed electrician.
!
NOTE: A dedicated, properly fused 13 Amp circuit is required, rated for the appropriate voltage (230-240V). An
isolation switch should also be incorporated in cases where the product plug is inaccessible after installation.

Technical Information

Rating : 230-240V~50Hz
Heat Output
Nominal Heat Output
Minimum Heat Output
Maximum Continous Heat
Output
Auxiliary Electricity Consumption
In Standby Mode
with electronic room temperature control.

Product Dimensions

VST130 - l
VST130 - lll
6
230V
P 1.8 -
Nom
P 0.9 -
min
P 1.8 -
max,c
el 0.5 -
SB
1325 mm
1390 mm
240V
1.9 kW
0.9 kW
1.9 kW
0.5 W
398 mm
398 mm
Dimplex