Icon Operations - Dimplex Opti-V VISTA VST130-I Installation And User Manual

Operation

Icon Operations

Standby
Volume
Increase
Volume
Decrease
Log Bed
Ambience
Brighteness
Log Bed
Ambience
Dim
Heat ON
Heat OFF
Temperature
Increase
Temperature
Decrease
Press to turn on the unit or to put it in standby mode.
When the unit is turned back on, it will retain the previously used settings.
Press to increase the audio volume ( re sound).
Press to decrease the audio volume ( re sound).
Press to increase the brightness of the LED log bed.
The unit will 'beep' each time the button is pressed until it reaches maximum or minimum
brightness.
Press to decrease the brightness of the LED log bed.
The unit will 'beep' each time the button is pressed until it reaches maximum or minimum
brightness.
Press to turn the heat on. This button toggles between half heat (900W) - indicated by 2
'beeps' and full heat (1800W) - indicated by 3 'beeps'.
Press to turn the heat off. When the heater is turned off the unit will 'beep' once. (The
fan continues to run for approximately 10 seconds).
Press to increase the temperature setting.
Press to decrease the temperature setting.
The temperature is adjustable from 15 to 30 and is displayed on the replace digital
display.
The unit will 'beep' each time the remote control temperature buttons are pressed.
13