Media Arrangement; Install The Side Glass Panels And Front Glass; Installation Finishing - Dimplex Opti-V VISTA VST130-I Installation And User Manual

Installation
Clean the glass with a damp cloth
and dry it with a lint free dry cloth.
9

Media Arrangement

Install the Side Glass Panels
10
and Front Glass
11

Installation Finishing

NOTE:
the mirrored glass, or on the inner side of the front
glass before you begin.
Place the magnetic timer cover over the manual controls.
Place the loose chips evenly across the front of the media bed.
Timer Cover Location
NOTE:
The side glass panels are only applicable for
VST130-III
NOTE:
Ensure the suction cups are securely attached to
the glass.
Install both side glass panels rst.
Using the suction cup to assist, install the side glass panels and
front glass by inserting the top of the glass into the upper slot.
Carefully tilt it toward the inside until it is in the vertical position.
Once in place, gently drop it into the bottom slot.
Finish the installation using the nishing materials of your choice.
CAUTION: Do not drill into rebox housing.
NOTE:
with 1/2" (12.7mm) drywall. Other nishing materials are
applicable.
Ensure there are no debris or nger prints on
Suction Cup
The replace trim is designed to be installed
11