Overheat Protection; Cleaning The Appliance; Technical Data; Warranty - Dimplex TRFW 201 Mounting And Operating Instructions

6.3.2 Cold air fan
Pressing button D causes the integrated fan with-
out heating action to be switched on. The duration
of the fan operation can now be set using button
C. Three time settings are possible:
Press button once (½h) –30 minutes ,
Press button twice (1h) – 60 minutes,
Press button three times (2h) – 120 minutes.
Press button C once again to switch off the fan.
6.4 Comfort Mode (Automatlc)
The control can also be switched to the automatic mode
of operation.
In the automatic mode, heating is predominantly effected
by means of radiant heating. In the event that the heat
output of the radiant heater is not sufficient for maintain-
ing the room temperature preset at the thermostat, the
hot air fan is automatically activated.
To activate the Comfort mode:
Unit must be switched on (power-on indicator light
A1 is illuminated)
Press button A for three seconds until indicator
light A1 is flashing.
To exit from the Comfort mode:
Press button A once more (indicator light A1 ex-
tinguishes, heater is off).
After the heater is switched on again (press button
A once more) the appliance resumes normal op-
eration (as described under "6.1 On/Off Button")

7. Overheat Protection

For your safety, the towel warmer/rapid heater is
equipped with an overheat protection each for the func-
tions "Radiant On" and "Hot air On".
If the heater becomes excessively hot, the appliance is
automatically switched off.
Resetting the "Radiant On" function:
Switch off the heater for a few minutes and allow it to
cool down.
Press the Reset button on the front of the appliance.
Resetting the "Fan On" function:
Switch off the heater for a few minutes and allow it to
cool down.
After the fan has been sufficiently cooled down, it is
again ready for operation.
After the cause of tripping of the overheat protection has
been eliminated (e.g. air slots are covered) the appliance
can be restarted.
Should the overheat protection trip repeatedly, please
consult your customer service agent.
8. Malfunctions
In the event that defects in your appliance result in mal-
functions, please contact your customer service agent.
Provide the service agent with a detailed description of
the malfunction.
For processing the service call, the product number (E-
number) and the manufacturing date code (FD-number)
of the appliance are required. These data can be found
on the rating plate (at the rear of the appliance).
Repairs and interventions in the appliance may only be
performed by a qualified electrician or the customer
service.

9. Cleaning the Appliance

Before the appliance can be cleaned it must be switched
off and have cooled down.
Wipe the outside of the heater with a soft, damp cloth
and then dry. Do not use scouring powder or furniture
polish for cleaning as these may damage the housing.
Dust that may have accumulated in the appliance can be
removed from the outside with a vacuum cleaner.

10. Technical Data

Rated capacity
Radiant heating
Fan capacity
Voltage
Enclosure type
Safety class
Dimensions W x H x D
Rail type
Weight
Rated capacity
Radiant heating
Fan capacity
Voltage
Enclosure type
Protection class
Dimensions W x H x D
Rail type
Weight
Rail dimensions (B x T)
Type A
467 x 65* mm
* Depth from rail to front panel

11. Warranty

Authorised dealers can provide information on the terms
and conditions of warranty. The warranty is not valid
without a sales receipt marked with the date of purchase.
7
TRFW 101 TRFW 151
1000 W 1500 W
400 W 600 W
600 W 900 W
230V~ 50 Hz 230V~ 50 Hz
IP 20 IP 20
I (with protective con- I (with protective
ductor) conductor)
431 x 1058 x 142 mm 431 x 1472 x 142 mm
A, B A, B, C
17.5 kg 20.0 kg
TRFW 201
2000 W
750 W
1250 W
230V~ 50 Hz
IP 20
I (with protective con-
ductor)
431 x 1472 x 142 mm
A, B, C
20.0 kg
Type B Type C
467 x 80* mm 467 x 95* mm