Felling A Tree - Villager VGS 620 S Original Instruction Manual

Villager
other factors.
2. While clearing the area around the tree, arrange a good foothold and retreat path.
3. Make a notch cut one-third of the way into the tree on the felling side.
4. Make a felling cut from the opposite side of the notch and at a level slightly higher
than the bottom of the notch.
It is extremely important that the chain brake be checked for
proper operation before each use and that the chain be
sharp in order to maintain the kickback safety level of this
saw. Removal
maintenance, or incorrect replacement of the bar or chain
may increase the risk of serious personal injury due to
kickback.

■ FELLING A TREE

1. Decide the felling direction considering the wind, lean of the
tree, location of heavy branches, ease of job after felling and
When you fell a tree, be sure to warn your
neighboring workers of the danger!
(B) "Notch cut"
(A) "Felling cut"
■ BUCKING AND LIMB
 Always ensure your foothold. Do not stand on the
log.
 Be alert to the rolling over of a cut log. Especially
when working on a slope, stand on the uphill side of
of the safety
VGS 620 S (GB)
devices, inadequate
23