Fuel And Chain Oil - Villager VGS 620 S Original Instruction Manual

Villager
A new chain will expand its length in the beginning of use. Check and readjust the
tension frequently as a loose chain can easily derail or cause rapid wear of itself and
the guide bar.
The Spiked bumper belongs to the chain saw. It must be screwed up on chain saw before
the initial use. Please fix the spiked bumper with two screws on the forefront of the chain
saw..

6. FUEL AND CHAIN OIL

6. Tighten the tensioner screw.
(1) Loosen
(2) Tighten
 Gasoline is very flammable. Avoid smoking or bringing
any flame or sparks near fuel. Make sure to stop the
engine and allow it cool before refueling the unit. Select
outdoor bare ground for fueling and move at least 3m
away from the fueling point before starting the engine.

The engines are lubricated by oil specially formulated
for air-cooled 2-cycle gasoline engine use. Use an
anti-oxidant added quality oil expressly labeled for
VGS 620 S (GB)
14