Villager
If warning seals peel off or become soiled and impossible to read, you should contact
the dealer from which you purchased the product to order new seals and affix the
new seal(s) in the required location(s).
Never remodel the product. We won't warrant the machine, if you use the remodeled
product or you don't observe the proper usage written in the manual.
3. SYMBOLS ON THE MACHINE
For safe operation and maintenance, symbols are carved in relief on the machine.
According to these indications, please be careful not to take a mistake.
(a). The port to refuel the "MIXGASOLINE"
Position: fuel tank cap.
(b).
The port to refuel the "CHAIN OIL"
Position: upper of the oil cap.
(c).
Put the switch to the "O" position, immediately the
Engine stops.
Position: Rear-left of the unit.
VGS 620 S (GB)
7