Conventional Oven - Kenwood CK 405 Operating Instructions Manual

5 - CONVENTIONAL OVEN

Attention: the oven door becomes
very hot during operation.
Keep children away.
GENERAL FEATURES
The conventional oven has 3 heating
elements which are:
• Top element
• Bottom element
• Grill element
NOTE:
Upon first use, it is advisable to operate
the oven at the maximum temperature
(thermostat knob on position 250) for 60
minutes in the position
15 minutes in the position
possible traces of grease on the heating
elements .
Smells and fumes produced during this
burn off process are not a cause of alarm .
Adequate ventilation should however be
provided in the room where the appliance
is installed, e .g . by opening a window .
WARNING:
The door is hot, use the handle.
ATTENTION - MOST IMPORTANT
Pay special attention not to touch the
hot heating element inside the oven
cavity.
Fig . 5 .1
643 W
735 W
1332 W
and for another
to eliminate
OPERATING PRINCIPLES
Heating and
CONVENTIONAL oven are obtained in the
following ways:
a. by natural convection
The heat is produced by the upper and
lower heating elements .
b. by radiation
The heat is radiated by the infra red grill
element .
FUNCTION SELECTOR KNOB (fig. 5.1)
Rotate the knob clockwise to set the oven
for one of the following functions .
TEMPERATURE KNOB (fig. 5.2)
To turn on the heating elements of the
oven, set first the function selector to the
required setting and then the thermostat
knob to the desired temperature .
To set the temperature, line up the
temperature knob indicator with the
required temperature .
The elements will turn ON or OFF
automatically according to the energy
need which is determined by the
thermostat .
The operation of the heating elements is
signalled by a light placed on the control
panel .
cooking in
Fig . 5 .2
the
15