Table of Contents
Advertisement
8. ProjectorView
ProjectorView is a web-browser based remote control and monitoring tool for network projectors. If you use the
projectors listed in page 32, see ProjectorView in "LAN Control Utility" User Manual included with the projector.
<Note>
• When CRESTRON is selected with the network menu, it becomes the Web control for CRESTRON.
8.1. Main functions
• It displays the status of network projectors (such as the name of the projector, lamp temperature, lamp hours,
errors and alerts).
• It controls network projectors (such as powering on and off network projectors and switching input or lamp
modes).
• It sends an E-mail notification when an error or warning occurs.
8.2. Starting ProjectorView
(1) Select the projector that you want to operate from the list of projectors on the main screen.
• Start ProjectorView for one projector at a time. You cannot concurrently use ProjectorView for multiple
projectors.
(2) Click [ProjectorView] in the tool bar on the main screen.
• The Web browser launches automatically. The password entry window is then displayed.
<Note>
• You can start ProjectorView by manually typing the projector IP address in your web browser's address
bar.
• If you are using a proxy server, do not enable proxy settings when accessing the projector IP address.
• Up to three ProjectorView units can be used to control a single projector.
(3) Enter the password and click [OK]. (The default password is "admin".)
• "ProjectorView" main window is displayed.
<Note>
• The connection will turn off in five minutes after the password entry window is displayed. You cannot enter
the password then. If this happens, restart the ProjectorView.
EN-20
Advertisement
Table of Contents
