Table of Contents
Advertisement
3. Main screen
Menu bar
Configuration
Add New Group:
Edit Schedule Setting:
Search Projector:
Assign IP:
Edit Projector Setting:
Edit E-mail Setting:
Search Projector Setting:
System Configuration:
Help
Tool bar
ProjectorView
Telnet
Visual PA2
Remote Controller
Refresh Status
Select All
Exit
You can specify the following settings:
You can create a new group.
You can edit schedule settings set for existing groups.
Automatically searches available projectors.
You can configure IP settings of the projector.
You can edit projector settings.
You can configure E-mail settings used for this application.
You can specify a search range for communication with the projector via a
router.
You can configure system settings of this application.
The version information is displayed.
You can control each projector separately using a Web browser. In case of an error in
the projector, the details of the error are displayed. For details, see page 20.
You can make various settings using Telnet. (Telnet enabled projectors only)
You can set the password, ProjectorView display language, LAN control, and
certification. For details, see page 31.
You can display a line of any text on the projector screen (Visual PA2 enabled
projectors only). For details, see page 28.
Remote Controller window can be displayed to operate the projector. You can turn
on/off the power, and select the input source.
The current status of Power, Input Source, AV Mute, and Lamp Time (Low) of the
projectors being displayed in the projector list can be reacquired. The status of Input
Source and AV Mute will not be obtained under the following conditions:
• when the projector is powered off
• during warm-up or cool-down.
All projectors currently displayed on the projector list can be set to selected/non
selected state.
You can exit "ProjectorView Global+". However, you cannot exit the application
during the automatic projector search and the projector status refreshing. Even
during the projector status acquisition, you can exit the application forcefully by
clicking the
button at the upper right corner of the main screen. In this case,
Windows warning message is displayed.
EN-6
Advertisement
Table of Contents
