Stand-Alone Mode - EuroLite AKKU MBT-3 Spot MK2 User Manual

Stand-alone mode

Automatic mode
In automatic mode, 9 different show programs are available that run at an adjustable speed.
1 Press the MENU button so many times until AUT for automatic mode is indicated in the display. Confirm
with the ENTER button.
2 Use UP and DOWN to select the number of the desired program (AU01-AU09). Confirm with ENTER.
3 The display then indicates the menu item for running speed (S.xxx). Use UP and DOWN to adjust the
running speed of the program from S.001 (slow) to S.100 (fast). Confirm with ENTER.
4 Press the MENU button to return to the main menu.
Sound control
Via the integrated microphone the unit can perfectly reproduce the 9 show programs to the rhythm of the
music (sufficient bass provided).
1 Press the MENU button so many times until Snd for sound control is indicated in the display. Confirm with
the ENTER button.
2 Use UP and DOWN to select the number of the desired program (SD01-SD09). Confirm with ENTER.
3 The display then indicates the menu item for microphone sensitivity (S.xxx). Use UP and DOWN to adjust
the microphone sensitivity of the program from S.000 (least sensitive) to S.100 (most sensitive). Confirm
with ENTER.
4 Press the MENU button to return to the main menu.
Preset colors
The mode COL offers the possibility to set each LED individually to emit one of 15 preset colors.
1 Press the MENU button so many times until COL is indicated in the display and confirm with the ENTER
button.
2 The display then indicates LCL for the left LED. Use the buttons UP and DOWN to adjust the desired
color (LC01-LC15) and confirm with the ENTER button.
3 The option MCL for the middle LED is then indicated. Continue in the same way as for the left LED. In
this manner you can set the desired color for the right LED (RCL) as well as for all LEDs (ACL). Confirm
each setting with the ENTER button
4 Finally, the menu for Strobe (S.xxx) is called up. Use the UP and DOWN buttons to set the desired
flash frequency from S.001 (slow) to S.100 (fast) and confirm with ENTER.
5 Press the MENU button to return to the main menu.
Manual mode
In the mode MNL each of the quadcolor LEDs can be individually adjusted for intensity. The device will then
constantly emit the adjusted color.
1 Press the MENU so many times until MNL is indicated in the display and confirm with the ENTER
button.
2 Now the display indicates the letter R for the color and the corresponding intensity value (000-255). Use
the buttons UP and DOWN to adjust the desired intensity and confirm with the ENTER button.
3 Now the color green can be adjusted; then blue and cold white. Confirm each setting with the ENTER
button.
4 Finally, the menu for Strobe (S.xxx) is called up. Use the UP and DOWN buttons to set the desired
flash frequency from S.001 (slow) to S.100 (fast) and confirm with ENTER.
5 Press the MENU button to return to the main menu.
33/44 00149656, Version 1.1