Operation; Operating Buttons; Menu Structure - EuroLite AKKU MBT-3 Spot MK2 User Manual

OPERATION

The built-in control panel of the unit features four operating buttons and a display which shows all operation
statuses. After connecting the unit to the mains it requires a short initialization process and is then ready for
operation. The display shortly indicates the firmware version, the battery status followed by the last operating
mode. All settings remain stored even if the device is disconnected from the mains. The device can be
operated in stand-alone mode via the control board and the IR remote control or in DMX-controlled mode via
any commercial DMX controller. With a suitable radio receiver, the DMX control signal can also be
transmitted wirelessly to the unit. The operating modes can be selected manually by means of the display
and the operating buttons.

Operating buttons

Button
MENU
ENTER
UP
DOWN

Menu structure

Default settings shaded
Mode
Automatic mode *
Sound control *
Color Presets **
Manual mode
DMX mode
Function
Selects the operating mode or returns to the initial screen.
Activates a value to be modified, enters a submenu or saves a value when
modifying.
Selects the next menu item or increases values when modifying.
Selects the previous menu item or decreases values when modifying.
Display
AU01-AU09
AUT
S.001-S.080-S.100
SD01-SD09
Snd
S.000-S.050-S.100
LCL
S.001-S.100
MC01-MC15
MCL
S.001-S.100
COL
RC01-RC15
RCL
S.001-S.100
AC01-AC15
ACL
S.001-S.100
R.xxx
G.xxx
MNL B.xxx
W.xxx
S.xxx S.001-S.100
d***
03CH
dПH
04CH
08CA
Function
Show program 1-9
(Program 1-5, SC; Program 6-9, FC)
Running speed slow > fast
Show program 1-9
(Program 1-5, SC; Program 6-9, FC)
Microphone sensitivity 0-100%
LC01-LC15 Color setting of the left light beam
Strobe, 000=off, slow > fast
Color setting of the middle light beam
Strobe, 000=off, slow > fast
Color setting of the right light beam
Strobe, 000=off, slow > fast
Color setting of the all three light beams
Strobe, 000=off, slow > fast
000–255 Brightness Red, 0=off, 1-100%
000–255 Brightness Green, 0=off, 1-100%
000–255 Brightness Blue, 0=off, 1-100%
000–255 Brightness White, 0=off, 1-100%
Strobe, 000=off, slow > fast
Starting address (read only)
d001-510
3-channel mode and starting address
d001-509 4-channel mode and starting address
d001-505 8A-channel mode and starting address
31/44 00149656, Version 1.1