Operation; Menu Structure; Stand Alone-Mode - EuroLite LED PFE-60 CW User Manual

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. You can move through the main menu by turning the encoder. Press the encoder to select the desired
menu item. You can change the selection by turning the encoder. Confirm each change by pressing the
encoder. The respective mode can be exited via the "Quit" menu item. The respective functions are
described below. All settings remain stored even if the device is disconnected from the mains. The device
can be operated either in standalone mode via the encoder or in DMX-controlled mode via a commercially
available DMX controller.
Encoder:
Selects the operating mode
Activates a value to be modified or saves a value when modifying

Menu structure

Default setting shaded:
Display
DMXAddress
DIM
DIM Strobe
Curve
Mode
PWMrate

Stand Alone-Mode

The respective mode can be exited via the "Quit" menu item.
DIM
WW
In WW mode, you can set the brightness of the warm white hue.
Press the encoder and then turn the encoder until the WW function is indicated in the display. Confirm by
pressing the encoder. Now you can set the desired brightness from 000 – 255 by turning the encoder.
Confirm by pressing the encoder.
CW
In CW mode, you can set the brightness of the cold white hue.
Press the encoder and then turn the encoder until the CW function is indicated in the display. Confirm by
pressing the encoder. Now you can set the desired brightness from 000 – 255 by turning the encoder.
Confirm by pressing the encoder.
A001 Setting the DMX starting address A001 – A512
WW Setting the LED (3200K) brightness 000 – 255
CW Setting the LED (5600K) brightness 000 – 255
CCT Setting fixture color temperature 3200K – 5600K
Intensity Setting the total brightness 000 – 255
Strobe Setting the strobe speed 000 – 012 (increasing)
Setting the dimmer curves
Dimmer curve 1: Linear;
Curve Dimmer curve 2: Exponential;
Dimmer curve 3: Logarythmic;
Dimmer curve 4: S-type
2CH Setting the 2-channel mode
5CH Setting the 5-channel mode
Pulse-width modulation
With this function the PWM frequency of the LEDs can be
PWMrate
set: 800Hz, 1200Hz, 2000Hz, 3600Hz, 12000Hz,
15000Hz, 25000Hz
Function
20/24
00147099, Version 1.1