Operating conditions
Always perform a test run without electric cannon first to avoid misfiring.
Keep a safety distance of at least 3 meters to the audience.
The electric cannons contain pressure containers which fire off the confetti/streamers at high
pressure. Therefore always make sure there is a free shooting range. Observe the manufacturer's
specifications for the output distance.
1
2
3
4
5
Switching off
Disconnect the cannon plug and remove the confetti cannon from the holder. Then unplug the mains cable.
OPERATION
CAUTION!
Place the electric cannon in the cannon holder.
Secure the cannon in the holder by hand-tightening the holder's
locking screw.
To adjust the shooting direction, release the adjustment screw on the
side, adjust the desired angle and retighten the adjustment screw.
Never shoot in the direction of people, animals or objects.
Plug the cannon plug into the connector on the top. The plug has a
recess so that it can only be plugged in one position.
Only connect the cannon plug, when the display shows the DMX
start address and no trigger command is being sent from the
DMX controller. The confetti cannon will otherwise be triggered,
when the cannon plug is inserted into the connector.
Now send the trigger command from your DMX controller. The
confetti cannon is triggered. The display indicates "Fire" for two
seconds.
19 • EN