Laser/Scan Modes - Honeywell MetroSelect Eclipse MS 5145 Configuration Manual

³ 1 1 8 7
³ 1 1 8 7

Laser/Scan Modes

³ 4 1 8 3
³ 4 1 8 3
³ 4 1 8 3
³ 4 1 8 3
³ 4 1 8 3
³ 1 2 0 0
³ 1 2 0 0
17–2
* CodeGate Active Out of Stand
1 3
CodeGate Inactive Out of Stand
0 3
* Normal Scan – The laser turns on after the IR
senses a bar code. The laser remains on for
0 4
approximately 3 to 10 seconds.
Blinky Scan – Laser turns on after the IR senses
a bar code. The laser will blink on/off for
2 4
approximately 60 seconds.
Continuous Blinky Scan – The laser blinks
continuously and the IR is inactive. This feature
3 4
is not available for the VoyagerPDF series.
Custom (One Shot) Scan – The laser turns off
after a good decode.
4 4
Enable Manual Activation Mode – The laser
activates when the CodeGate button is pressed.
5 4
* Normal Timeout (Button Act)
0 0
0.5 Second Timeout (Button Act)
1 0