Operating Modes Settings - Honeywell HF680 User Manual

Operating Modes Settings

*
IR Trigger Mode
Note: In this mode, the unit work
with IR Trigger to detect object.
When IR is trigger on, it will start
to scan and decode bar code
symbols. After 5 Seconds, IR
trigger is trigger off, the unit will
enter a power save mode and
stop decoding. the Bar code data
will be output in a format
determined by the selected
terminal interface.
Streaming Presentation Mode
Note: In this mode, the unit will
keep to scan and decode bar code
symbols all the time. Bar code
data will be output in a format
determined by the selected
terminal interface.
In the case where a menu bar
code symbol is decoded, the
scanner will switch operation to
the respective mode.
Presentation Mode
Note: In this mode, the unit work
with optical trigger & IR Trigger to
detect barcode symbol. When
optical trigger is trigger on, it will
start to scan and decode bar code
symbols. After 5 Seconds, optical
trigger will trigger off, the unit will
enter a power save mode and
stop decoding. the Bar code data
will be output in a format
determined by the selected
terminal interface.
1 – 5