Ms9535 Voyagerbt - Honeywell MetroSelect Eclipse MS 5145 Configuration Manual

19

MS9535 VoyagerBT

The MS9535 can act as a client to other devices equipped with Bluetooth
wireless technology. If the device's address is a 12-digit hex value that does
NOT start with a FNC3 (e.g., 000CA700118) the user must first scan the Get
BT Address bar code (below), and then scan the device's address bar code.
Scan the Provide BT Service bar code (below) to place the MS9535 into
service mode. In this mode, other Bluetooth wireless technology enabled
devices can initiate a connection to the scanner.
³ 1 2
³ 1 2
³ 8 4
³ 9 9
³ 9 9
³ 9 9
³ 8 1
³ 0 0 0
Provide BT Service
³ 0 0
BT PIN Required – The MS9535 will require a
valid PIN when Bluetooth wireless technology
4 3 1 6
enabled devices try to initiate a communication
connection.
* BT Pin Not Required
4 3 0 6
BT PIN Default Value – The default PIN ID will be
the last 4 digits of the serial number.
0 9 0 0
Next Bar Code is BT Pin ID – When scanned this
feature enables the scanner to store the next
9 9 1 8
scanned bar code as the PIN ID. The PIN ID must
be numeric and be 4 to 16 characters in length.
The BT PIN Required bar code (shown above)
must also be scanned to utilize the PIN ID.
Enable BT Address Transmission
8 0 4 5
Enable BT Software Version Transmission
8 0 4 4
Sleep in 1 Minute – The scanner will go into
sleep (power save) mode after the laser has
9 5 6 0
been off for 1 minute.
®
Get BT Address
C A 7 F F F
0 C A 7 0 0 0
F F F
0 0 0
®
19–1