Concatenation Configuration Mode; Pre-Defined Concatenation Configuration Mode - Honeywell MetroSelect Eclipse MS 5145 Configuration Manual

Concatenation Configuration Mode

The following bar codes are used to configure variable time requirements used
to find the second bar code of the ISBT concatenation sequence.
³ 3 0 1 3
³ 3 0 1 3
³ 3 0 1 3
³ 3 0 1 3
³ 3 0 1 3
³ 3 0 1 3
³ 3 0 1 3

Pre-Defined Concatenation Configuration Mode

The first two bar codes below enable or disable pre-defined concatenation
sequences. The remaining bar codes enable the specific pre-defined
concatenation sequence shown, but are not needed to enable concatenation.
They can be used to disable or re-enable any selected pre-defined
concatenation sequence.
³ 1 3 8 4
³ 1 3 8 4
³ 4 3 8 4
† This feature is only supported in the MS9500 Voyager product series.
5–2
100 msec to Find Concatenation Sequence
1 0
200 msec to Find Concatenation Sequence
2 0
300 msec to Find Concatenation Sequence
3 0
400 msec to Find Concatenation Sequence
4 0
500 msec to Find Concatenation Sequence
5 0
600 msec to Find Concatenation, Sequence
6 0
700 msec to Find Concatenation Sequence
7 0
Enable Pre-Defined Concatenation Sequence
1 3
Disable Pre-Defined Concatenation Sequence
0 3
Donation Identification Number + AB0/Rh (D)
Blood Groups =á + =% Concatenation
8 0
†
†