Code Bytes Usage; Code Bytes 0-9 - Honeywell MetroSelect Eclipse MS 5145 Configuration Manual

16

Code Bytes Usage

The scanner must be in Configuration Mode for the features requiring code
bytes for configuration. The Enter/Exit Configuration Mode bar code must be
scanned before starting the configuration cycle. User configurable prefix/suffix
characters can then be saved by scanning the 3 digit decimal equivalent of the
ASCII character into the appropriate character location with the code byte bar
codes.
Example: To add an Asterisk (*) as a Prefix, scan the bar codes.
Code Bytes 0–9
³
³
³
³
³
³ 5
³ 6
³ 7
1. Enter/Exit Configuration Mode
2. Configurable Prefix #1
3. Code Byte 0
4. Code Byte 4
5. Code Byte 2
6. Enter/Exit Configuration Mode
Code Byte 0
0
Code Byte 1
1
Code Byte 2
2
Code Byte 3
3
Code Byte 4
4
Code Byte 5
Code Byte 6
Code Byte 7
(3 beeps)
(1 beep)
(1 beep)
(2 beeps)
(3 beeps)
(3 beeps)
16–1