Table of Contents
Advertisement
Warning!
damaged by static electricity. Touch
something metal on the printer before
you touch a disk.
26
Install memory and option cards
Installing a hard disk
Hard disks are easily
Hard disk
Ribbon cable
Mounting plate
Follow the instructions in this section to
install an optional hard disk. You need a
small Phillips screwdriver to attach the
hard disk to the mounting plate.
If an option card has been installed, you
may need to remove it before installing
the hard disk.
1
Remove the system board access
cover (see page 22).
2
Remove the mounting plate, hard
disk, ribbon cable, and attachment
screws from the package.
3
Align the ribbon cable connector
with the connector pins on the
hard disk.
4
Attach the ribbon cable to the hard
disk.
5
Align the screw holes on the
mounting plate with the holes in
the hard disk.
6
Secure the mounting plate to the
hard disk with the screws.
Advertisement
Table of Contents
