Table of Contents
Advertisement
Card
MarkNet internal print server
USB/Parallel 1284-C Interface Card Adds a Universal Serial Bus (USB) port or a parallel port.
Coax/Twinax Adapter for SCS
Tri-Port Adapter
Infrared Adapter
Note:
and network duplex models ship with an
Ethernet print server already installed.
28
Install memory and option cards
Installing an
option card
Function
Adds an Ethernet or Token-Ring port so you can connect your printer to a
network.
Install a MarkNet™ N2501e or N2401e internal print server if you received
either of these cards as part of a multifunction printer upgrade.
Adds a coaxial/twinaxial port.
Adds LocalTalk, serial, and infrared ports. For details on setting up and using
the Tri-Port Adapter, refer to the documentation that shipped with the card.
Adds infrared functionality.
The network, network internet,
Your printer has one expansion card slot
that supports a number of option cards.
The following table describes their
function.
You need a small Phillips screwdriver to
install these options.
1
Remove the system board access
cover (see page 22).
2
Remove the screw from the metal
plate that covers the connector
slot, and then lift the plate off.
Save the screw.
Advertisement
Table of Contents
