Removing An Option Card; Removing A Hard Disk - IBM 1220 User Reference

Removing an option card

Complete the following steps to remove an internal print server, Tri-Port Adapter, Infrared Adapter,
Coax/Twinax Adapter, or USB/Parallel Interface Card.
W :
Option cards are easily damaged by static electricity. Touch something metal on the
ARNING
printer before you touch an option card.
1
Remove the system board access cover. See
2
Locate the option card.
3
Remove the screw that secures the card to the system board connector slot.
4
Gently pull the card out of the connector.
5
If you saved the metal plate that covers the connector slot and you do not plan to insert
another card, attach the plate:
a
Slide the clip side of the plate in first, making sure the clip end covers the groove on the
system board.
b
Use the screw to secure the other end of the metal plate to the system board.
6
Place the card in its original packaging, or wrap the card in paper and store it in a box.
7
Replace the system board access cover. See

Removing a hard disk

Complete the following steps to remove a hard disk. If an option card has been installed, you must
remove it before removing the firmware card. See
W :
Hard disks are easily damaged by static electricity. Touch something metal on the
ARNING
printer before you touch a disk.
1
Remove the system board access cover. See
2
Locate the hard disk.
Accessing the printer system
Reinstalling the system board access
Removing an option
Accessing the printer system
61
board.
cover.
card.
board.