Huawei LUNA2000-97KWH-1H1 Quick Manual page 46

XX.XX.XX.XX
4. Enter https://
browser. If you log in to the WebUI for the first time, a security risk warning is displayed.
Click Continue to this website.
5. Log in to the WebUI.
Scenario 1: Initial Login When the User Name Is Displayed as Admin
In this scenario, you need to update the SmartLogger to V300R023C00SPC120 or later.
For SmartLogger V300R023C00SPC120 or later versions:
• Method 1: Enter admin in User Name and log in using your new password.
• Method 2: Select installer from the drop-down box of User Name and set the login
password as prompted.
Scenario 2: Initial Login When the User Name Is Empty
•
Protect the password by changing it periodically, and keep it secure. Your password
might be stolen or cracked if it is left unchanged for extended periods. If you lose the
password, the device must be restored to its factory settings. In these cases, the
Company shall not be liable for any loss caused to the plant.
•
You will be locked out for 10 minutes after five failed password attempts in 5 minutes.
•
A dialog box with recent login information is displayed after login. Click OK.
(IP address of the SmartLogger) in the address box of your
Parameter
Language
User Name
Password
In this scenario, the SmartLogger software version
is V300R023C00SPC120 or later.
Parameter
Language
User Name
Password
45
Description
Select a desired language.
The default value is admin.
•
The initial password is
Changeme.
•
Use the initial password upon
the first power-on and change
it immediately after login.
Then, use the new password
to log in again.
Description
Select a desired language.
Select installer.
Set the login password as
prompted.