Huawei LUNA2000-97KWH-1H1 Quick Manual page 38

Installing an Auxiliary AC Power Cable
6.6
Obtain the AC auxiliary power from the mains or a reliable power supply. Do not directly
obtain power from the AC side of renewable energy inverters such as PV inverters and wind
power converters.
Installing AC Input Power Cables for the UPS
6.7
Obtain the AC auxiliary power from the mains or a reliable power supply. Do not directly
obtain power from the AC side of renewable energy inverters such as PV inverters and wind
power converters.
•
In off-grid scenarios, a UPS must be configured. To connect the AC input power cable to
the UPS, perform the following steps.
•
Recommended UPS input switch specifications: 230/400 V AC 32 A/2P.
1. Remove the short-circuiting bar from 1–2 and insert it to 2–3 on the XU terminal block.
2. Remove the short-circuiting bar from 4–5 and insert it to 5–6 on the XU terminal block.
3. Connect the cable.
37