Warranty; Transportation; Storage; Care And Maintenance - Kärcher CVH 2 Manual

Hide thumbs Also See for CVH 2:

Manual (126 pages)

User manual

Operator's manual (40 pages)

Available languages

This is used for cleaning joints, grooves between

doors and windows, tiny slits, etc.

Warranty

The warranty conditions issued by our sales company

responsible apply in all countries. We shall remedy pos-

sible malfunctions on your device within the warranty

period free of cost, provided that a material or manufac-

turing defect is the cause. In a warranty case, please

contact your dealer (with the purchase receipt) or the

next authorised customer service site.

(See overleaf for the address)

Transportation

The battery has been tested in accordance with the rel-

evant rules for international transport and can be

transported / shipped.

Storage

Note

● Store the appliance in a dry room.

● Consider the weight of the appliance when storing it.

1. Insert the appliance into the storage dock.

2. Put the crevice nozzle and the upholster brush into

accessory storage.

Care and maintenance

Note

● Use the appliance only when all filters and the dust

container are installed.

● Defective filters and filters that can no longer be

cleaned must be replaced.

Before doing any work on the appliance:

1. Switch off the appliance.

Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or

in the case of malfunctions not mentioned here, please contact your authorised Customer Service.

Fault

The appliance does not

run.

Suction capacity de-

creases. / Abnormal

sound or operating noise

which becomes louder.

Electrical connection

Power frequency

Mains voltage

Voltage of charger

Working voltage of the battery

Charging time when the battery is completely dis-

charged

Battery capacity

Battery type

Protection class

Rated power

Troubleshooting guide

Possible cause

Battery is nearly empty.

The appliance is in danger of overheat-

ing.

Dust container is full.

HEPA filter set is clogged.

Technical data

2. Unplug the power supply from the power outlet.

Cleaning the filter set and the dust container

ATTENTION

Incorrect cleaning of the HEPA filter

Damage to the HEPA filter

Do not clean the HEPA filter in a washing machine.

Do not dry the HEPA filter with a hair dryer.

The HEPA filter ensures clean exhaust air.

● Clean the HEPA filter if it is visibly dirty.

● Replace the HEPA filter if it is visibly damaged.

● We recommend replacing the HEPA filter every 6

months based on your use of the device.

1. Unlock the dust container.

Illustration G

2. Unplug the filter set from the dust container. Turn the

filter cover counterclockwise. Remove the filter cov-

er, unplug the HEPA filter from the steel filter.

Illustration H

3. Clean the HEPA filter, and carefully empty / knock

the dirt out of the HEPA filter.

Illustration I

4. Empty the dust container, and rub down inside using

a cloth.

Illustration J

5. Clean the filter cover, steel filter and dust container

under running water.

Illustration K

6. Allow the filter cover, steel filter and dust container

to dry completely.

Illustration L

7. Insert the filter set into the dust container, and turn

the dust container clockwise to latch into place.

Illustration M

Remedy

1. Charge the battery.

1. Check whether the dust container is

clogged.

2. Clean the dust container.

3. Switch the appliance on again.

1. Check the dust container.

2. Check and clean the filter.

CVH 2

50 - 60

100 - 240

7.2

Minutes

180 ~ 240

mAh

2000

Li-ion

English

CVH 3 Plus