A Selection Can Now Be Made Vertically As Well As Horizontally - Tascam SX-1 Release Note

The Nudge and Grid registers now support triplet and dotted note values, which can be a major aid in
editing. Now you can use these time values for both nudging and editing to the grid. These new
selections are located in the existing Nudge and Grid dropdown menus. They will not be visible until
Bars and Beats are selected as the display value.
Once Bars and Beats is selected as the display value, both new options show up. It is of little use to
select both triplet and dotted at the same time, so it is disallowed to simplify things. Basically, both
Triplet and Dot are modifiers to the existing choices — meaning that selecting Triplet from the
dropdown menu modifies the existing note value. For example, if Quarter note was already selected,
adding the Triplet choice creates a quarter note triplet. If dotted is selected, the note value becomes a
dotted quarter note.
This is useful when copy/dragging MIDI notes around to get them in time, or when an event needs to
be moved or nudged by a note value other than the options previously available.

10. A selection can now be made vertically as well as horizontally

35