Routing Is Now Possible In Groups Of Up To 16 Channels - Tascam SX-1 Release Note

To change one channel s delay units using the LCD screen, press and hold the Delay Units soft button
and move one of the soft knobs at the bottom of the LCD screen. You will notice that the units field in
the channel corresponding to the knob you moved changed from sam to ms .
To copy this new setting to the rest of the channels in the mixer, press and hold the Copy To All button
and move the knob you changed from samples to milliseconds. You will notice that all of the sixteen
channels in that bank move as well. Simply set the knob back down to zero and you ve set all the
channels in that bank to milliseconds.

17. Routing is now possible in groups of up to 16 channels.

Routing multiple channels is now much easier in version 1.5. It is now possible to route groups in one,
two, four, eight, and sixteen channel increments.
Here s the new pulldown menu on the VGA ROUTING screen
And the same screen on the LCD
Here s how easy it is:
On the VGA, set the number of channels you would like to route at once using the pulldown menu. For
our purposes select Sixteen Channels:
13