Table of Contents
Advertisement
Operating the printer
Paper handling
Paper types
The printer can handle either single sheets or continuous forms. Single sheets, also called
cut sheets, include envelopes and non-continuous, multipart forms. Continuous forms in-
clude labels and multipart forms fed into the printer using the forms tractors.
For best results, use paper that meets the specifications listed in the following table. (See
Appendix A, "Paper specifications" on page A-4 for detailed specifications.) If you are unsure
of the suitability of a particular type of paper, try testing the paper or consult your dealer.
Paper Specifications
Paper Size
Width -- Cut Sheet
Width -- Fanfold
Length
Thickness
Paper Thickness and Number of Copies
Thickness
Copies
Narrow printer
102 to 267 mm (4 to 10,5")
102 to 267 mm (4 to 10,5")
102 up to 559 mm (4 to 22")
Up to 0.35 mm (0,014")
0.35 mm (0.014 in) maximum total thickness.
1 to 4 copies, including the original. For carbon-inter-leaved paper,
the carbon counts as a copy.
Paper handling
Wide printer
102 to 381 mm (4 to 15")
102 to 381 mm (4 to 15")
2-17
Advertisement
Table of Contents
