Table of Contents
Advertisement
Configuration
In order to use USB Skype™ Phone Adapter and it's features:
1. The USB Skype™ Phone Adapter must be plugged into the PC.
2. A telephone handset must be plugged into the USB Skype™
Phone Adapter.
3. The USB Skype™ Phone Adapter must be connected to the
telephone wall jack*.
4. The USB Skype™ Phone Adapter Utility Agent must be running
(see blue telephone icon in the System Tray).
* This is only required for making regular phone calls or for
forwarding Skype calls to your mobile (or other off-site) phone or for
toll bypass applications.
If the USB Skype™ Phone Adapter Utility Agent is not running (i.e.
no blue telephone in the system tray), make sure the USB Skype™
Phone Adapter is connected to the PC and start the USB Skype™
Phone Adapter as shown below (Start > All Programs > TRENDnet
TVP-SP5G > Utility):
13
USB Skype™ Phone Adapter Status
When the USB Skype™ Phone Adapter is installed and the software is
installed properly, you will see a blue phone icon in the system tray as
shown below.
If the utility is running and the USB Skype™ Phone Adapter is
removed or Skype™ is not running, then the telephone icon will be
red as shown below.
Testing the Connection
Skype™ provides a useful feature to test your connection. It is called
Skype Test Call (echo123). This will help you verify that the USB
Skype™ Phone Adapter, device driver, and the telephone are all
connected and installed properly.
14
Advertisement
Table of Contents
