Package Contents
The USB Skype
TM
Phone Adapter package includes the following:
TM
One USB Skype
Phone Adapter
One RJ-11 Phone Cable
One USB Cable
One Multi-Language Quick Installation Guide
One CD-ROM (including Driver / Utility / User's Guide)
System Requirements
TM
USB Skype
Phone Adapter
USB cable
RJ11 cable
Telephone (regular telephone, cordless phone or DECT phone)
Telephone service (for conf call, 3 way calling and forwarding
features)
Broadband internet service is recommended
PC with the following minimum specifications:
400MHz processor or higher
Windows 2000 or XP
Available USB port (1.0, 1.1 or 2.0)
Skype™ version 1.1.079 or higher must be installed*
128MB RAM
8MB available hard disk space
CD-ROM drive
TM
Note: The USB Skype
Phone Adapter must be connected directly to
the PC USB port or to a powered USB hub.
5
INSTALLATION
DO NOT CONNECT THE USB SKYPE
TO YOUR COMPUTER UNTIL INSTRUCTED TO DO SO BY
TM
THE USB SKYPE
PHONE ADAPTER INSTALLATION
WIZARD
The following instructions will guide you to through the process of
installing the USB Skype™ Phone Adapter.
The installation procedure is to:
1. Install Skype™ Software
2. Start the USB Skype™ Phone Adapter software installation
3. Plug in the USB Skype™ Phone Adapter WHEN INSTRUCTED
TO DO SO
4. Verify the installation is OK
5. Connect a telephone handset to the USB Skype™ Phone Adapter
6. Connect the USB Skype™ Phone Adapter to the wall jack*
7. Use your USB Skype™ Phone Adapter to make and receive
Skype™ calls
*Note that this is optional and only required for making/receiving
PSTN phone calls.
TM
PHONE ADAPTER
6