Table of Contents
Advertisement
Click the Call forwarding tab to see the Call Forwarding parameters
as shown below.
In order to forward incoming Skype™ calls to a telephone number
such as your mobile phone, change the Skype™ to Phone Line
settings as follows:
19
If you are on a PBX, you may need to press a digit to get an outside
line (i.e. 0). In this case you would enter 0,,16175551212.
In order to forward incoming regular calls to a Skype™ call, such as
through SkypeOut™ or to a Skype account, enter speed dial number
(e.g. 20) associated with the Skype User without the * key or enter the
SkypeOut™ number (e.g. 0016171234567).
Toll Bypass
Toll bypass is similar to forwarding, except the incoming caller hears
a beep, enters a password and then dials out an arbitrary number
instead of fixed forwarding as described in the previous section.
There are two common scenarios for this. You can call in from your
mobile phone to the computer that the USB Skype™ Phone Adapter is
connected to and make a low cost SkypeOut™ international call. This
is useful if you are in the same geographical location as USB Skype™
Phone Adapter and want to make international calls.
The second common scenario is you Skype™ to the computer that the
USB Skype™ Phone Adapter is connected to and make a low cost
local call over the PSTN line. This is useful if you are traveling abroad
and want to make a low cost local call (in the geographical location
that the USB Skype™ Phone Adapter is in).
Right-click on the Utility Agent (blue telephone icon in the System
Tray) and select Configure as shown below.
20
Advertisement
Table of Contents
