Wifi Protected Setup (Wps); Pin Input Configuration (Pin) - TRENDnet N600 User Manual

Wireless dual band usb adapter

Hide thumbs Also See for N600:

Table of Contents

TRENDnet User's Guide

WiFi Protected Setup (WPS)

Wi-Fi Protected Setup (WPS) is an optional certification program from the Wi-Fi Alliance

that is designed to ease the task of setting up and configuring security on a wireless

network. There are two methods used in the WPS as below instruction.

Follow the steps below when using the WPS configuration with the Pin Input

Configuration method. Please note that WPS will attempt to authenticate in 120

seconds. Make sure you allow this time frame to prevent any failures.

1. Click on the Pin Input Configuration (PIN) button, the PIN is shown on the button of

the windows.

2. Enter the PIN code into the WPS "Client PIN number" of you wireless access point

or router ( in example, TRENDnet TEW-639GR Wireless N Gigabit Router) then click

the Start PIN button, the wireless access point or router will start the WPS

configuration process.

3. Choose to select the specific AP/Router or a WPS enabled device with client PIN

entered. Choose Yes to allow you to select your wireless network. Choose No to

have the wireless adapter select your wireless network on its own.

TEW-664UB

Table of Contents

Tew-664ub