Configuration - TRENDnet TEW-644UB User Manual

：
Note For FCC domain device, you can only select Channel 1~11.
For ETSI domain device, you can only select Channel 1~13.
Link Quality: Shows the link quality of the Wireless N USB Adapter with the
Access Point when operating under Infrastructure mode.
Signal Strength: Shows the wireless signal strength of the connection between the
Wireless N USB Adapter with the Access Point.
Data Rate: Shows the statistics of data transfer, and the calculation is based on the
number of packets transmitted and received.

Configuration

This screen is where you set the basic wireless settings for the Wireless N USB
Adapter
Profile Name: Shows the Profile Name.
SSID: Service Set Identifier, which is a unique name shared among all clients in a
wireless network. The SSID must be identical for each client in the wireless
network.
Wireless Mode: There are two modes available for selection
●Infrastructure – to establish wireless communication with the LAN and other
wireless clients through the use of Access Points.
●Ad-Hoc – to establish point-to-point wireless communication directly with other
wireless client devices.
6