Table of Contents
Advertisement
voicemail mode. In either case, the currently playing message will be
stopped.
Call Recorder
With the USB Skype™ Phone Adapter active, the attached telephone
handset can be used to check for, and listen to your Skype™
voicemail.
The call recorder is accessed and configured through the Utility Agent
(blue telephone icon in the System Tray) Call Recorder tab as shown
below.
You can change the default location where the recordings will be
stored by pressing the button (with three dots) immediately to the right
of the location field. The folder containing the recordings can be
accessed by clicking the Open folder button. With the location folder
open you can access the individual recordings.
23
Recordings are named according to the following naming convention:
<time>__<date>.wav
For example, 15_08_06__17_24_56.wav.
The wave files can be played through any application that supports
wave files (e.g. Windows® Media Player).
Recording is controlled by two mechanisms: automatic and manual.
Manual recording has two modes:
Through the Call Recorder screen above - controlled by
pressing the record (red dot) and stop (black square)
buttons.
From the telephone handset – controlled by pressing the
#7 keys (start recording) and #8 keys (stop recording) on
the telephone handset connected to the USB Skype™
Phone Adapter.
To enable the Automatic Recording all calls function, checked the
Record all calls and click Apply then OK.
24
Advertisement
Table of Contents
