Page 2
Table of Contents Table of Contents English ..................... 1. Before You Start ................How to Install ..................Troubleshooting ..................Version 08.30.2006...
1. Before You Start Package Contents TU2-ET100 Driver CD-ROM Quick Installation Guide System Requirements CD-ROM Drive CPU: 300MHz or above Memory: 256 MB RAM or above Computer With An Available USB 1.1 or 2.0 Port Windows XP/2000/ME/98SE, Mac OS X...
2. How to Install 1. Insert the CD-ROM into your computer's CD-ROM Drive. 2. Connect the Adapter to an available USB port of your computer. The “Found New Hardware Wizard” will appear. Windows XP Windows 2000 3. Select No, not this 3.
Page 5
Windows XP Windows 2000 4. Click Install the 4. Click Search for a software automatically suitable driver for my (Recommended) device (recommended) and then click Next. and then click Next. 5. Click CD-ROM drive 5. Click Continue and then click Next. Anyway.
Page 6
Windows XP Windows 2000 6. Click Finish. 6. Click Next. 7. Proceed to step 9. 7. Click Yes. 8. Click Finish. English...
Page 7
9. Connect a RJ-45 cable from the Adapter to a Switch, Router or Cable/DSL Modem. Your installation is now complete. English...
Refer to the User Guide included on the Driver CD-ROM for installation instructions. If you still encounter problems or have any questions regarding the TU2-ET100, please refer to the User's Guide included on the Driver CD-ROM or contact TRENDnet's Technical Support Department.
Need help?
Do you have a question about the TU2-ET100 and is the answer not in the manual?
Questions and answers