Wifi Protected Setup (Wps); Pin Input Configuration (Pin) - TRENDnet TEW-805UB Quick Installation Manual

Ac1200 dual band wireless usb adapter

Hide thumbs Also See for TEW-805UB:

Table of Contents

TRENDnet User's Guide

WiFi Protected Setup (WPS)

Wi-Fi Protected Setup (WPS) is an optional certification program from the Wi-Fi Alliance

that is designed to ease the task of setting up and configuring security on a wireless

network. There are two methods used in the WPS as below instruction.

Follow the steps below when using the WPS configuration with the Pin Input

Configuration method. Please note that WPS will attempt to authenticate in 120

seconds. Make sure you allow this time frame to prevent any failures.

1. Click on the Pin Input Configuration (PIN) button, the PIN is shown on the button of

the windows.

2. Enter the PIN code into the WPS "Client PIN number" of you wireless access point or

router ( in example, TRENDnet TEW-639GR Wireless N Gigabit Router) then click the

Start PIN button, the wireless access point or router will start the WPS configuration

process.

3. Choose to select the specific AP/Router or a WPS enabled device with client PIN

entered. Choose Yes to allow you to select your wireless network. Choose No to have

the wireless adapter select your wireless network on its own.

4. Select a wireless access point or router then click the Select button start the WPS

configuration.

TEW-805UB

Table of Contents