Making And Receiving Calls; Setting Up Skype Speed Dial - TRENDnet TVP-SP5G User Manual

Making and Receiving Calls

You can continue to use the telephone handset connected to the USB
Skype™ Phone Adapter to make and receive standard telephone calls
as you used without any change. To make a standard phone call, just
pick up the handset and dial as you normally would. Make sure you
hear a dial tone before you dial ## or the phone number. To answer
(receive) a standard phone call just pick up the handset when the
phone rings.
When you receive an incoming Skype™ call, the handset connected to
the USB Skype™ Phone Adapter will ring. To answer the call, just
pick up the handset and speak as you normally would. To end the call,
simply hang up the handset as you normally would.
If you have SkypeOut™, you can use the USB Skype™ Phone
Adapter connected handset to make SkypeOut™ calls by picking up
the handset, pressing ## (only if the USB Skype™ Phone Adapter is in
PSTN mode), to indicate to the USB Skype™ Phone Adapter that this
will be a Skype call, dialing as per the SkypeOut™ recommended
dialing sequence, 00 + country code + telephone number and pressing
the asterisk (*) key. If the USB Skype™ Phone Adapter is already in
Skype™ mode, pressing ## is not required.
Examples:
PSTN mode: ## 001 617 123 4567 *
Skype™ mode: 001 617 123 4567 *
In order to make a call to a Skype™ contact, you will need to use the
Skype™ program to assign a speed dial (as described in the user
manual) to each person you would like to call from the USB Skype™
Phone Adapter connected handset. Then simply pick up the handset,
press ## (if in PSTN mode), to indicate to the USB Skype™ Phone
Adapter that this is a Skype call, you will hear a new dial-tone, press
the speed dial number (e.g. 10) and then press the asterisk (*) key.
15

Setting Up Skype Speed Dial

This section describes how to setup speed dials in Skype™. This is
required in order to use a USB Skype™ Phone Adapter connected
handset to dial to a Skype™ contact. It is not required for making
SkypeOut™ calls using a USB Skype™ Phone Adapter connected
handset.
Right-click on the desired contact as shown below and select Set
Speed-Dial.
Enter the desired speed dial number (e.g. 10) as shown below and
press the OK button.
16