Table of Contents
Advertisement
C
LOAD SENSOR:
Since the load sensor is only available in certain models it may not be available in
your product. The load amount is not measured in products without a load sensor. The
recommended amount of laundry load is displayed on the screen. The screen displays
"Full Load" symbol
symbol
for woolen programme and similar programmes.
Time display
Remaining time for the completion of the programme while it is running is
displayed as "01:30" in hours and minutes format.
C
Programme time may differ from the values in section "4.6.3 Programme and consumption
table" depending on the water pressure, water hardness and temperature, ambient
temperature, amount and the type of laundry, auxiliary functions selected and the changes at
the mains voltage.
4.6.13 End Time
1 Open the loading door, place the laundry and put detergent, etc.
2 Select the washing programme, temperature, spin speed and, if required, the
auxiliary functions.
3 Set the end time of your choice by pressing the
indicator illuminates.
4 Press
Start / Pause
the end time on the display starts flashing.
C
Additional laundry may be loaded during the End Time countdown period.
the end of the countdown, End Time indicator turns off, washing cycle starts and the time of
the selected programme appears on the display.
When the End Time selection is completed, the time appears on the screen
consists of end time plus the duration of the selected programme.
34 / EN
for Cottons programme and similar programmes, "Half Load"
for Synthetics programme and similar programmes, and "Less Load" symbol
With the End Time function, the startup
of the programme may be delayed up to
End time setting
24 hours. After pressing End Time button,
the programme's estimated ending time is
displayed. If the End Time is adjusted, End
Time indicator is illuminated. "End Time
Setting" appears on the display.
In order for the End Time function to be
activated and the programme to be completed
End time enabled
at the end of the specified time, after the
duration setting the Start indicator starts to lit.
If you want to cancel End Time function, press
End Time button until the End Time indicator
turns off or press On / Off button to turn off
and on the machine.
button. Time countdown starts. ":" symbol in the middle of
C
Do not use liquid detergents when you activate
End Time function! There is the risk of staining
of the clothes.
End Time
button.
End Time
Washing Machine / User's Manual
At
Advertisement
Table of Contents
