End Time - Grundig GWP89619WW User Manual

ing light of the corresponding step will illu-
minate. When this function is selected, the
drum rotates for up to 8 hours to prevent
the laundry from wrinkling at the end of the
program. During this 8-hour period, you can
cancel the program and take off your
clothes at any time. Press the function se-
lection key or the machine on/off key to
cancel the function. The program tracking
light stays on until the function is cancelled
or the step is complete. If the function is
not cancelled, it remains active during sub-
sequent wash cycles.
• Filter replacement
When your microfiber filter is full and you
change the new filter, press and hold the
corresponding auxiliary function button for
3 seconds. The display will flash to indicate
that the filter is full.
When you change the filter, the cor-
responding auxiliary function is not
pressed down for 3 seconds, the
warning that the filter is full will dis-
appear automatically after running
the program with the filtration act-
ive.
• Child Lock
Using the child Lock feature, you can pre-
vent children from tampering with the ma-
chine. This way, you can prevent changes
to an ongoing program.
With the child Lock engaged, you
can switch the machine on and off
with the on/off button. When you
start the machine again, the pro-
gram resumes where it left off.
If the buttons are pressed while
child Lock is active, the audible
warning sounds. If the buttons are
pressed five times in a row, the
buzzer cancels.
To activate child lock:
Press and hold the corresponding auxiliary
function button for 3 seconds. When the
"3-2-1" countdown on the display has
ended, the child Lock icon appears on the
display. When this warning appears, you
can release auxiliary function button 3.
To deactivate the child lock:
Press and hold the corresponding auxiliary
function button for 3 seconds. The child
Lock icon disappears when the "3-2-1"
countdown on the screen ends.
• Wireless connection
With wireless connectivity, you can pair
your machine and smart device. This way,
you can get information about the status of
your machine from your smart device and
control your machine.
To enable Wi-Fi:
Press and hold the remote control button
for 3 seconds. The display shows the "on"
symbol after the countdown "3-2-1". When
this warning appears, release the remote
control button. The wireless icon blinks
when the product connects to the Internet.
When the connection is successful, the
icon's light remains on.
To disable Wi-Fi:
Press and hold the remote control button
for 3 seconds. The countdown "3-2-1" ap-
pears on the display and the symbol "off"
appears on the display.
Before you can enable Wi-Fi, the ini-
tial setup of the machine with the
HomeWhiz app must be completed.
If you press the "Remote Control"
button after the installation, the
wireless connection will be activ-
ated automatically.

6.9 End Time

Time display
When the end time function is selected, the
remaining time until the programme starts
is shown in hours such as 1h, 2h, and the
remaining time to complete the programme
after your programme starts is shown in
hours and minutes as in the 01:30 example.
EN / 30